Using Ultrasonic Devices for Cleaning Rust

Perhaps one of the most efficient cleaning techniques available today is the use of ultrasonic cleaners. They are highly effective in removing the most stubborn of dirt particles hidden in the crooks and corners of the most intricate of objects. The level of perfection they provide in cleaning has led them to be adopted worldwide.

Understanding Cavitation

At the core of an ultrasonic cleaner is the transducer which converts the electrical energy into high-frequency sound waves known as ultrasonic energy. These sound waves, when released into the cleaning liquid, causes the formation of bubbles and their quick collapse.

This process is known as cavitation, and it causes the release of a tiny pressure wave which reaches to every corner of the object to be cleaned and pulls out the dirt and contamination. This technique acts as a scrub, with the difference being that the scrub reaches even the most inaccessible parts.

How can Ultrasound Devices help you clean rust?

Do you have a device that is covered with rust? Did you know that you can bring it back to its full functionality by removing the rust? This is where the main challenge comes in. Once rust forms, it can be extremely difficult to get rid of, and it eats away at the equipment reducing it to a crumbling mass.

This stubborn rust can be easily removed with the help of an ultrasonic cleaner by Hilsonic. If you accidentally left your tools out on a rainy night or have started seeing signs of rust formation on any of your beloved devices, it is time to start the cleaning action immediately. This cleaning action will not take long, just around half an hour. At the end of the process, you will have your tool back as good as new.

How do you go about it?

The first step in removing the rust is to choose a cleaning solution. Water alone will not be very effective. You can consult experts on what sort of cleaning solutions to choose. Some cleaning solutions are specifically made for cleaning rusted devices.

Commonly, a highly acidic solution is preferred. However, if there is any plastic or aluminum component in the device, a slightly milder cleaning solution would be a better choice. Solutions like the Elma Tec Clean S1 are often used.

Once, you have found a cleaning solution, you need to fill up the container to the brim. Before this, you can make use of the degas function of the supersonic cleaner to remove any cavitation inhibiting gas.

Keep the heater ready at one hundred and forty degrees Fahrenheit. It is better if you separate the parts if the object is detachable and make sure that none of the parts touch while cleaning. Put these parts in the basket. When the required temperature has been reached, put in the basket containing your object parts. Now cavitation will start occurring effectively removing the rust.

Clean and dry the parts well after they’ve been cleaned and then put them back together. If you have some objects lying around, rendered useless because of rust, now you know what to do.